---
title: 'How to repair an inflatable kayak'
url: 'https://www.guia-kayak.com/en/conseils/comment-reparer-un-kayak-gonflable'
markdown: 'https://www.guia-kayak.com/en/conseils/comment-reparer-un-kayak-gonflable.md'
lang: en
date: '2021-06-11'
description: 'Repairing an inflatable kayak’s bladder is not difficult. All it takes is method and the right equipment. Here is the procedure to follow to repair a hole in the bladder of an inflatable kayak. Inflatable kayaks are usually made up of 3 bladders: 2 side bladders and 1 for the floor. These bladders …'
taxonomy:
  tag:
    - kayak-gonflable
  category:
    - conseils
---

# How to repair an inflatable kayak

**Repairing an [inflatable kayak’s bladder ](https://www.nootica.fr/canoe-kayak/les-gonflables/piece-detachee-kayak-gonflable.html)is not difficult. All it takes is method and the right equipment. Here is the procedure to follow to repair a hole in the bladder of an inflatable kayak.**

[Inflatable kayaks ](https://www.nootica.fr/canoe-kayak/les-gonflables.html)are usually made up of 3 bladders: 2 side bladders and 1 for the floor. These bladders are located in an outer textile envelope that acts as a protection against friction and abrasion. However, it can happen that one of the bladders bursts during an impact with an object

## What is required to repair an inflatable kayak?

All first of all, you need :

- 1 tube of PVC glue or polyurethane glue
- 1 pVC sheet
- 1 pair of scissors
- 1 sheet of sanding paper (220 grain)
- 1 spatula to apply
- 1 weight (a bottle full of water will do)

## What is the procedure for repairing the kayak’s bladder?

- Unscrew the valve and remove the bladder from the nylon envelope.
- Unroll the kayak
- Inflate the bladder to isolate the leak. If the leak is located at a weld, the repair is not recommended because it has little chance of lasting
- Pencil in the area of the leak for future reference and deflate the bladder
- Lightly sand the damaged surface over an area of about 6 cm around the snag. Do this on a flat, dry and clean surface
- Clean with soapy water and dry completely with a cloth
- Cut a patch of about 5 cm on each side. Round off the corners to prevent the patch from catching and peeling off
- Glue the PVC patch with the glue in a circle that gets bigger and bigger
- Spread the glue evenly over the patch to the edges of the piece.
- Glue the area to be repaired
- Apply the patch to the area to be repaired
- Push out any air bubbles with your spatula
- Clean excess glue from around the repair patch
- Place a weight so that the patch remains in contact under pressure with the bladder to be repaired
- Wait 24 hours without touching it

![](https://www.publicdomainpictures.net/pictures/280000/velka/couple-drinking-coffee-1539769524lCc.jpg)

- Put the bladder back in its housing
- Screw on the valve
- Inflate the bladder to 1/3 to give it a shape
- Pull on the front and back of the kayak so that the bladder falls back into place
- Finish inflating

---

## Navigation

- Parent: [Tips](https://www.guia-kayak.com/en/conseils.md)
- Previous: [A pair of kayak shoes for what?](https://www.guia-kayak.com/en/conseils/une-paire-de-chausson-kayak-pour-quoi-faire.md)
- Next: [What is a canoe kayak sit on top?](https://www.guia-kayak.com/en/conseils/quest-ce-quun-canoe-kayak-sit-on-top.md)
